Introduction
Maleic anhydride (C₄H₂O₃), with a molar mass of approximately 98.06 g/mol, is a single chemical compound with a single CAS number. Yet the economics of producing it can vary considerably from one manufacturer to another.
Two producers may supply maleic anhydride that meets the same product specification, ship it from the same port, and sell it into the same downstream application. Even so, their ability to remain profitable when market prices decline may be very different. The reason is not necessarily product quality. It lies in the maleic anhydride production process behind the product: the feedstock selected, the amount of feedstock converted into saleable product, the operating life of the catalyst, and whether the reaction generates a valuable co-product in addition to maleic anhydride.
The industry's feedstock transition has largely moved in favor of n-butane oxidation. However, this does not mean that all n-butane-based producers operate with the same cost structure. Some plants benefit from refinery integration and access to an established steam network. Others operate as standalone units and must purchase feedstock at market prices. Differences in catalyst campaign length, production scale, and operating efficiency further widen the gap in manufacturing costs.
This article examines the main maleic anhydride production routes and explains why the cost structures of n-butane-based plants can still differ significantly. It also looks at how feedstock efficiency, catalyst life, co-product steam recovery, and plant integration influence a producer's ability to withstand a market downturn.
Disclaimer: Physical and chemical parameters cited in this article are reference values for general orientation. Actual product specifications, test results, and handling requirements vary by grade, manufacturer, and production batch. Always refer to the SDS and COA issued for the specific material being purchased.
1. The Feedstock Shift Is Largely Complete: The Remaining Question Is Cost Structure
1.1 Why benzene oxidation no longer sets the industry's cost benchmark
The benzene-to-maleic-anhydride route once played an important role in defining the industry's production landscape. Its position has since declined substantially, particularly in China, the world's largest producing region.
By 2025, n-butane-based plants accounted for more than 95% of China's effective maleic anhydride production capacity. Benzene-based capacity had fallen to approximately 280,000 tonnes per year, with much of the remaining capacity either idled or operating at low utilization rates.
This change is more than a gradual adjustment in feedstock preference. The declining scale and utilization of benzene-based facilities have reduced their influence on the overall supply and pricing structure of the Chinese market.
The global transition has followed the same general direction, although the pace and extent differ by region. N-butane oxidation is now the dominant production route, and most new capacity announcements are based on this technology. Benzene oxidation remains in limited operation in certain markets, particularly in parts of North China and India, but it represents a legacy production route rather than the main direction of capacity expansion.
For market participants, the distinction is important. Although benzene-based material may still appear in regional supply, the economics of new and expanding maleic anhydride capacity are increasingly determined by n-butane oxidation.
1.2 Why n-butane oxidation gained the advantage: Feedstock utilization and process economics
The shift from benzene to n-butane was driven primarily by production economics and feedstock utilization.
Benzene oxidation has an approximate atom economy of 66%. This means that a considerable proportion of the feedstock atoms do not end up in the desired maleic anhydride product. Part of the feedstock is converted into unwanted byproducts, reducing the amount of saleable product obtained from the raw material.
By comparison, n-butane oxidation offers substantially better overall feedstock utilization. Its reaction pathway allows a greater proportion of the feedstock carbon to be retained in the target product, approaching near-quantitative atom utilization under the relevant process accounting basis.
The practical advantage is a lower feedstock requirement per tonne of maleic anhydride produced. Since feedstock is generally the largest variable cost component, this efficiency advantage has a direct effect on manufacturing economics.
The environmental and permitting considerations also support the transition. Benzene is a recognized carcinogen and presents a distinct occupational health and emissions-management burden. N-butane oxidation avoids using benzene as the primary feedstock and has a different emissions and permitting profile, which can simplify certain aspects of plant development and operation.
Taken together, these factors explain why n-butane oxidation has become the preferred route for most new maleic anhydride capacity. The main competitive question is no longer simply whether a plant uses benzene or n-butane. It is how efficiently each n-butane-based facility converts its feedstock into saleable product and manages the costs associated with operating the plant.
What this means for buyers: The feedstock transition explains the broad direction of the industry, but it does not identify the lowest-cost producer. To understand differences between suppliers, it is necessary to examine the operating and integration advantages within the dominant n-butane route.
2. The Cost Components That Separate One n-Butane Plant from Another
2.1 Feedstock yield: How much butane becomes saleable product?
N-butane oxidation is more feedstock-efficient than benzene oxidation, but that does not mean every n-butane-based plant achieves the same production performance.
Commercial conversion and yield depend on several factors, including catalyst formulation, reactor design, operating conditions, and process control. Differences in catalyst age and plant operating discipline can also affect performance over time.
Reported commercial performance generally falls within a range. Butane conversion is commonly reported in the mid-70% to mid-80% range, while maleic anhydride weight yield may fall in the low-60% range, depending on the process conditions and catalyst condition.
Some advanced catalyst systems report oxidation yields above 100 wt% on a reactor-outlet basis. However, these figures need to be interpreted carefully. They reflect particular process configurations and calculation methods and should not be compared directly with figures from other plants unless the calculation basis, feedstock basis, and process boundaries are consistent.
For cost analysis, the underlying principle is straightforward: a plant that obtains more saleable maleic anhydride from the same amount of butane generally has a lower raw-material cost per tonne of product, assuming other conditions remain comparable.
Even a difference of a few percentage points in yield can become significant over a full year of operation. At high production volumes, a relatively small improvement in feedstock utilization translates into substantial savings. When market prices are high, those savings improve margins. When prices fall and margins become thin, they may determine whether a plant can continue operating economically.
Why buyers should pay attention: Yield is not normally reported on a product COA, but it is one of the factors behind a producer's cost position. A supplier with a more efficient production process may have greater room to maintain competitive offers during a market downturn.
2.2 Catalyst life: How campaign length affects operating costs
Vanadium-phosphorus-oxide (VPO) catalysts are widely used in commercial n-butane oxidation to maleic anhydride.
Catalyst performance is important not only because it influences reaction efficiency, but also because catalyst life determines how long a production unit can operate before a catalyst replacement or major maintenance intervention is required.
Commercial catalyst service life is generally measured in years rather than months. Some industry references describe VPO catalyst products with expected operating lives exceeding four years. Technical literature and patent disclosures also describe commercial catalysts that have remained under evaluation after 26 months of operation, with performance recovery possible through regeneration under suitable conditions.
These figures should not be treated as a universal service-life guarantee. Actual catalyst life depends on catalyst formulation, feedstock quality, operating conditions, temperature control, and the maintenance practices of the individual plant.
The economic effect is nevertheless clear. Catalyst replacement and associated maintenance can involve material costs, labor, downtime, and lost production. A plant that operates for four years between catalyst changes can spread these costs over a larger cumulative output than a plant that needs more frequent replacement.
The difference also affects production scheduling. Longer catalyst campaigns reduce the frequency of major interventions and help a plant maintain a more stable operating schedule. Shorter campaigns can increase the annualized maintenance burden and reduce effective production time.
For this reason, catalyst life contributes to the full-cycle manufacturing cost rather than simply the cost of the catalyst itself.
Practical implication: When comparing producers, nominal production capacity alone does not reveal how efficiently a plant operates over a complete production cycle. Catalyst durability, regeneration capability, and campaign length all contribute to the cost floor.
2.3 Co-product steam: An important source of margin support
N-butane oxidation is a strongly exothermic reaction. A significant amount of heat is released during the process, and this heat must be removed to maintain appropriate operating conditions.
In a well-integrated production facility, part of the reaction heat can be recovered through a heat-recovery system and converted into steam. Depending on the plant configuration, this steam can be used internally or supplied to other operations as a saleable co-product.
This creates an important economic advantage. The producer is not relying solely on revenue from maleic anhydride; recovered steam can also offset energy purchases or generate additional income.
The impact can be substantial when maleic anhydride prices are weak. During 2025, Chinese n-butane-based producers were reported to have incurred average losses of approximately RMB 1,300–1,340 per tonne when the maleic anhydride production line was assessed on a standalone basis. After accounting for the value of co-product steam, the comprehensive margin moved back above breakeven for part of the year.
The distinction between standalone product economics and integrated-site economics is essential. A negative margin on the maleic anhydride line does not necessarily mean the entire production facility is operating at a loss.
However, not every plant can capture the same value from recovered steam.
Facilities located within integrated petrochemical complexes may have nearby steam-consuming operations, such as styrene or other heat-intensive units. These plants can use recovered steam internally and reduce their purchases of external energy.
A standalone merchant plant without a suitable internal steam consumer may have to sell the steam externally. The actual value it can realize then depends on local demand, pipeline infrastructure, steam quality, and the availability of buyers.
The heat generated by the reaction is present in the production process, but its contribution to profitability depends on how effectively the plant can recover and use it.
Practical takeaway: Co-product steam is not a feature of the maleic anhydride itself. It is a site-level economic advantage that can reduce a producer's effective cost burden and improve its ability to withstand weak product prices.
2.4 Production scale and integration: Why plant configuration matters
Production scale influences manufacturing costs by determining how fixed expenses are distributed across total output.
A larger production train can spread maintenance, labor, and administrative overhead over a greater volume of product. When utilization remains high, this generally reduces the fixed-cost burden per tonne.
However, scale is only one part of the cost equation. Integration with upstream feedstock suppliers and downstream energy consumers can create additional advantages.
A plant located within a refinery or petrochemical complex may benefit from more reliable feedstock access, shared utilities, established logistics, and opportunities to recover and use process energy. These advantages can reduce the costs and commercial risks associated with operating a standalone facility.
By contrast, a merchant plant that purchases n-butane at market prices and sells maleic anhydride at market prices is more directly exposed to changes in both feedstock and product prices. It may also have fewer opportunities to offset energy costs through internal steam utilization.
This does not mean that every integrated plant is automatically the lowest-cost producer. Actual cost performance still depends on feedstock pricing arrangements, plant efficiency, utilization rates, maintenance requirements, and the value of recovered energy.
The important point is that two facilities with similar nominal capacity may have very different cost structures because their positions within the wider industrial complex are not the same.
These differences are rarely visible in headline capacity figures. They become more apparent when market conditions deteriorate and producers respond differently to declining margins.
3. What the Cost Differences Mean for Buyers and Supply Geography
3.1 Regional production concentration amplifies the impact of cost structure
Global maleic anhydride production capacity is concentrated in a relatively small number of regions.
By 2025, global capacity was estimated at approximately 5,000 kilotonnes per year, with Asia-Pacific accounting for close to 85% of the total. The Americas and Europe represented substantially smaller shares. Within Asia-Pacific, China was the largest individual producing country, with a capacity share well above that of other national markets.
This concentration makes the cost differences between production regions commercially important.
When a large proportion of regional capacity consists of integrated, large-scale n-butane-based plants, the region may be better positioned to maintain production during a market downturn. Steam recovery, feedstock access, and operating scale can provide a degree of protection against weak maleic anhydride prices.
In regions where production relies more heavily on smaller or less-integrated facilities, the same market conditions may result in more frequent production cuts or temporary shutdowns.
The result is that regional supply availability is influenced not only by total installed capacity, but also by the cost structure of the facilities that make up that capacity.
For buyers, this distinction matters when evaluating the reliability of different supply origins. A region with substantial nominal capacity may not always provide the same level of export availability when market margins are under pressure.
3.2 A qualitative ranking of cost resilience
Precise cost comparisons between individual producers are difficult without reliable plant-level information. Feedstock contracts, catalyst performance, operating rates, utility arrangements, and integration benefits can change over time.
Nevertheless, the structural factors discussed above provide a useful qualitative framework for comparing cost resilience.
Highest cost resilience
Large-scale n-butane-based plants with refinery integration, reliable access to competitively priced feedstock, and an internal steam consumer generally have the strongest structural advantages. They can benefit from feedstock efficiency, economies of scale, and the ability to capture the value of recovered steam.
Moderate cost resilience
Standalone n-butane-based plants with sufficient scale and long catalyst campaigns may still maintain a competitive position. However, without the same degree of feedstock integration or steam utilization, they may be more exposed to market-price fluctuations.
Lower cost resilience among active capacity
Smaller n-butane-based facilities and residual benzene-based plants may face greater cost pressure. Smaller scale can increase fixed costs per tonne, while benzene-based production generally lacks the feedstock-utilization advantage of the dominant n-butane route.
This is a structural comparison, not a prediction of which specific plant will operate in any given month. Individual operating decisions also depend on contractual obligations, inventory positions, maintenance schedules, local demand, and short-term feedstock prices.
For buyers, the practical significance is that suppliers offering the same product specification may have very different levels of cost resilience. A producer with a structurally lower cost base may be able to maintain supply and offer competitive prices under conditions that put greater pressure on a less-integrated competitor.
A buyer comparing suppliers only by price and purity may therefore overlook important information about the sustainability of an offer and the reliability of supply during a market downturn.
4. A Framework for Reading Process-Related Supply Signals
Understanding the maleic anhydride production process does not require buyers to become plant engineers. However, a few targeted questions can help procurement and supply-chain teams interpret market offers more effectively.
4.1 Identify the feedstock route behind the production capacity
Ask whether the supplier's capacity is based on n-butane oxidation or benzene oxidation. Most new capacity is based on n-butane, but residual benzene-based material may still circulate in certain markets.
The production route provides an initial indication of the supplier's underlying feedstock economics.
4.2 Recognize the importance of yield and catalyst life
Feedstock yield and catalyst campaign length are not normally listed on a product COA. They do not directly determine whether an individual batch meets its product specification, but they influence the producer's manufacturing cost.
For buyers evaluating long-term supply relationships, these factors can help explain why one supplier may be able to maintain production and pricing more consistently than another.
4.3 Understand the role of co-product steam
Ask whether the producer can recover and use the steam generated during the exothermic oxidation reaction.
Steam recovery does not change the chemical properties of maleic anhydride, but it can improve the economics of the production site. The value depends on whether the plant has an internal steam consumer or can sell the recovered steam at a commercially attractive price.
4.4 Consider regional capacity alongside plant-level cost structure
Asia-Pacific's large share of global capacity means that production economics in this region have a substantial influence on international supply.
However, regional capacity figures alone do not explain how much material will be available for export during a downturn. Buyers should also consider plant integration, production scale, and the relative cost resilience of the facilities supplying the market.
Summary
The maleic anhydride production process has largely converged on n-butane oxidation. This transition has resolved much of the industry's feedstock competition, but it has not made the cost structures of different producers identical.
Significant differences remain between plants that combine efficient feedstock conversion, long VPO catalyst campaigns, large-scale production, reliable feedstock access, and co-product steam recovery, and facilities that have only some of these advantages.
These differences become particularly important when maleic anhydride prices decline. A plant with a lower full-cycle cost base may continue operating through a period of weak margins, while a less-integrated facility may need to reduce its operating rate or temporarily suspend production.
For buyers and supply-chain professionals, the key lesson is that the same product specification does not necessarily mean the same supply resilience. The COA confirms the quality of a particular batch, but it does not reveal the production economics behind the supplier's offer.
Understanding the feedstock route, yield performance, catalyst life, steam recovery, and plant integration provides a broader view of the supplier's position. In a market where cost differences can determine who continues producing during a downturn, these process-related factors are valuable signals for evaluating long-term supply reliability.

